Description
Overview
GAORFID QR code reader which integrates high-performance card reading RF circuit and antenna, the device supports wiegand26/32/34/66 interface types, to meet the user in different scenarios to choose a different interface mode more flexible use. Induction card categories are equally diverse, support most types of cards on the market 125 Khz, 13.56 Mhz, 15693, desfire, and so on. The reader adopts zinc alloy shell to effectively prevent the use of outdoor use in the process because of the age of the equipment leads to rust problems, the front side of the use of toughened glass as a device panel, more beautiful, at the same time there is a reliable scratch-resistant abrasion resistance. Waterproof process, the use of resin waterproof process, waterproof ability up to IP68 level, can be soaked in water card reader still work normally.
Technical Specifications
| Power Supply | 9-24 V |
| Current | Standby: 60 mA
Fill light: 140 mA |
| Interface | Wiegand |
| Protocol | 14443A/14443B/15693 |
| Reading Type | M1/EM/15693/Desfire/NFC |
| Working Mode | Proximity Card+Sweep Code+Password |
| Proximity Distance | Proximity Card: 3-8CM Scan Code: >30CM |
| Specifications | Parameters |
| Material | Zinc Alloy + Tempered Glass |
| Keyboard Type | Multi-touch |
| Size | 4.72 in x 2.83 in x 0.71 in. (120 mm * 72 mm *18 mm) |
| Waterproof Grade | IP68 |
| Operating Temperature | -40°F to 185°F. (-40°C to +85°C) |
| Sensing Speed | <100ms |
| Weight | 0.551 lb. (250 g) |
Wiring Instructions
| Specifications | Parameters | Instructions |
| Red | 9-24V | Power Positive |
| Black | GND | Power Negative |
| Green | D0 | Data |
| White | D1 | Data |
| Blue | LED | Light Control Cable |
| Yellow | BEEP | Sound Control Cable |
| Grey | Wiegand26/34 | Switching Cable (to ground) |
