Description
Overview
This RFID Antenna Hub provides a low cost alternative for the creation of a large, contiguous RFID read zone by enabling from 5 to 32 antennas to be attached to a single GAO 236015 UHF Gen 2 RFID Reader/Writer with 4 Antenna Ports*. The system is an ideal solution for applications such as RFID smart shelves or document tracking applications. Installation is quick and easy with included antenna virtualization software, GPIO Adapter Kit (sold separately) and system feedback including LED status indicators and software providing diagnostics and alerts.
*note: each Hub can control up to 8 readers.
Key Features
- Easy operation of 5-32 antennas attached to a single GAO 236015 UHF Gen 2 RFID Reader/Writer with 4 Antenna Ports and GPIO Adapter
- Easy installation with feedback for reliable installation
- Enclosure includes mounting tabs
- LEDs status indication
- Includes diagnostic software
Technical Specifications
Dimensions | 4 x 2.4 x 1 in (102 x 61 x 24 mm) |
Weight | 3.5 oz (100 g) |
Power Supply | 5V provided by the GPIO Adapter |
Power Consumption | 25mA (80mW) max |
Connectors | RF Input: SMA Female; 8 RF Outputs: SMA Female; 1 Digital I/O: RJ45 |
Mounting Options | Two 1/4 in mounting holes |
Max Input Power | 34 dBm |
Insertion Loss | 1.3 dB (Max) |
Isolation | 36 dB (Min) |
Return Loss | 24 dBm (Min) |
Antenna Hub Switching Speed | <200 μs based on hardware design |
Device Switching Speed | About 25 ms |
Operating Temperature | -40 °C to 80 °C |
Storage Temperature | 25 °C |
Humidity | 5% to 95%, non-condensing |
IP Rating | IP52 |
Frequency | 860-960 MHz |
Certifications | FCC, CE, RoHS |
Cables | RF cable maximum length: depends on environment/region, typical 1/2 dB per meter signal loss; Digital cable (Cat5) for control, maximum length: 300 ft (100 m) if shielded, 100 ft (30 m) if unshielded |
Antenna Port Numbering | 1-32 on Antenna Hubs; 1, 9, 17, 25 on native reader ports |
API | LLRP Tool Kit (LTK), SDK |
Test Software | Multi-Reader v6.8 or later |