GAO RFID’s 2.45 GHz Gain Adjustable RFID Reader uses a built in omni-directional antenna allowing it to identify transponder tagged items up to 328 feet (100 meters) in all directions. Users can adjust the identification distance from less than 16 ft – 328 ft (5 m to 100 m) according to actual situations in order to make identification more accurate. The reader uses an advanced 0.18 µm CMOS IC for ultra-low power consumption. The reader features optional built in PoE (Power over Ethernet) which is the ability for the LAN switching infrastructure to provide power over a copper Ethernet cable to an endpoint or powered device.
- Adjustable identification distance from <16 ft – 328 ft.
- Built-in omni-directional antenna.
- Advanced 0.18 μm CMOS IC for low ultra-low power consumption.
- Optional built-in PoE (Power over Ethernet).
- Personnel Tracking
- Warehouse Management
- Closed Loop Asset Tracking
- High Value Asset Tracking
|Direction||Omni-directional, standard whip antenna|
|Range||0 ft to 328 ft (0 m to 100 m) adjustable|
|Frequency||2.4 GHz to 2.5 GHz ISM (UHF-Ultra High Frequency)|
|RF Output Power||0 dBm|
|Power||50 mA, 9 V|
|Modes||Direct Mode and Buffering Mode. In direct mode, the reader uploads messages to the host system in real time. In buffering mode, the reader save messages, which are uploaded only when requested by the host system|
|Dimensions||4.96 in x 4.06 in x 1.10 in (126 mm x 104 mm x 28 mm)|
|Data Rate||1 Mbps|
|Interface||TCP/IP (RS232 is optional) (PoE is optional)|
|Operating Temperature||-40 ℉ to 176 ℉ (-40 °C to 80 °C)|
|Operating Humidity||95 % Non-condensing|