This HF reader is a password protected programmable time recorder that allows an administrator to remotely manage all device settings, and has an internal back-up battery.
This high frequency RFID antenna is designed for use with medium to high power readers and is intended for applications with demands for long distance identification.
This high frequency RFID antenna is designed for use with medium to high power readers and is intended for applications with demands for long distance identification.
The 13.56 MHz smart label handheld reader has a read range of up to 2'' (5 cm) and can read and write ISO 15693 compliant smart labels.
This dual frequency RFID reader kit is compliant with ISO 14443A Mifare MF and Ultralite DESfire protocols. It is used for designing an access control system or similar application.
This rugged handheld terminal RFID kit is compatible with a wide range of applications such as dairy operation, veterinarian, animal identification, small parts identification and medical parts.
This RFID reader with a built-in antenna can read the data from a distance of 7cm. Reader has long battery life and compact size.
This 134.2 kHz ASA fixed reader antenna panel is designed for applications with demands for long distance identification and a large reading volume.
In combination with stationary RFID readers, this 134.2 kHz antenna is used for contactless identification of animals and objects.
The 134 kHz long range reader has a read range of over 20'' (51 cm) and has electrostatic discharge (ESD) protection for use in tough environments.
This RFID reader can upload the data in real time via Bluetooth to any enabled pc and the reader feature fast and accurate scanning.
This portable RFID reader which is highly protected from accidental drops has two power modes which enables best read range in one mode and long battery life in another.
This 2-channel TTL relay board provides three different relay coil voltages you to switch high-current loads.
This 2.4 GHz 14 dBi signal gain antenna is designed to strengthen signal power, increase wireless range, reduce dead spots, and provide reliability.
This indoor direction 2.45 GHz antenna has a 6 dBi signal gain and is designed to strengthen signal power, wireless range and reduce dead spots.
The 2.45GHz active RFID reader kit is commonly used for access control operations. The reader has ultra-low power consumption and has multiple interfaces such as TCP/IP, RS232, and PoE.
This kit is designed for frequency range 2.45 GHz and the reader here provides a read range of up to 328 feet. It is ideally suited for asset tracking.
This RFID kit is designed for active frequency range 2.45 GHz and the reader provides a considerable range up to 328 feet which is suited for asset tracking applications.
This active 2.45 GHz Rfid reader has built-in antenna, dual operation mode of uploading or data buffering, allowing it to be used for personnel tracking.
This USB portable reader has a read range of up to 65 ft (20 m) and can upload its last 100 received messages in either its real-time or delayed mode.
This gain adjustable reader uses a built-in omni-directional antenna to provide a read range of up to 328 ft (100 m) and features optional built-in PoE.
This 2.4 GHz 9 dBi direction antenna is designed for outdoor use to strengthen the signal power and increase the wireless range.
This gain adjustable reader uses a built-in omni-directional antenna, providing a reading/receiving range of up to 328 ft (100 m), and uses Wi Fi for data transmission.
GAORFID SKU# 217032 IP67 rated robust Gateway operates at 2.45GHz, 217032 is a Bluetooth low energy (BLE) to 3G/4G cellular/LTE, Wi-Fi, Ethernet, PoE connectivity gateway or signal receiver.
This 4-channel TTL relay board provides three different relay coil voltages allowing you to switch high-current loads.
The 433 MHz active RFID badge reader with two external antennas enables automated tracking of RFID badges.
The 433 MHz active RFID reader guarantees the access control by operating at 433 MHz or 868 MHz frequency and featuring an integrated relay for controlling the accessories directly.
This 433 MHz RFID reader kit consists of a circular polarized external patch antenna with a read range up to 492 ft. The reader has multiple interfaces and collision-avoidance functionality.
GAO's Active 433 MHz Reader kit enables asset tracking and the reader allows ultra-long range asset identification and auditing indoor or outdoor facilities.
This 433 MHz UHF Reader kit is designed to work for a parking control system. It has multiple tags and a reader that are suitable for this application.
This RFID reader is powerful, robust, and cost effective which also allows the combination with GPRS, GSM, Wi-Fi, and Barcode expansion modules on a single unit.
This active standalone seeker/reader is used as a portable device, has a reading range of up to 262 ft (80 m), and operates for 7 hours with a rechargeable battery.
This Compact Stealth RFID Antenna uses the 433 MHz frequency, is waterproof and has a small footprint. It is suitable for applications where a subtle installation is required.
This 433 MHz Directional Antenna has a 7.1 dBi gain and is made from durable aluminum for long-lasting performance.
This 433 MHz Flat "Puck" Omni-Directional Antenna is a powerful antenna designed for harsh environments with a waterproof, flat, and discreet form factor.
These 433 MHz Half-wave Magnetic Base Antennas are remote omni-directional antennas are waterproof with magnetic base.
The 433 MHz Long Range TCP/IP Ethernet RFID Reader & Gateway is a device designed specifically for the localization and tracking purposes within the industrial sector.
This 433 MHz Omni-directional 1/4 Wave RFID Antenna is made of flexible polypropylene material.
This 433 MHz antenna is omni-directional and waterproof: designed with outdoor applications in mind.
This 433 MHz Panel Antenna is light weight, yet provides high gain and is designed for intelligent management systems.
This 433 MHz RFID Antenna is designed with LHCP or RHCP Polarization, and is suitable for most indoor environment applications.
The L-AN350 patch antenna is typically used for its unique directional properties. Its reception field is of a hemispheric nature.
This 433 MHz Slender Semi-directional RFID Antenna is designed for outdoor use, is semi-directional, with an ABS anti-UV cabinet that is made to withstand the elements.
This Ultra Flat Linear Omni-directional Antenna uses the 433 MHz frequency and is designed for mounting onto windshields.
This product is a desktop UHF Gen 2 reader and writer suitable for the North American, European and other regions
This versatile product is a compact desktop reader and writer that supports UHF Gen 2 frequencies for multiple geographical regions, such as North America and Europe.
This kit is designed for UHF range 860-960 MHz and the reader here provides a read range of up to 16 feet. It is ideally suited for asset tracking.
This 860-960 MHz UHF kit is designed to work for a parking control system. It has multiple tags and a reader that are suitable for this application.
This RFID reader has long read range and high read rate, comes with built-in GPS and can be deployed in all environments, mobile or stationary, outdoor or indoor.
This UHF standalone kit is designed to provide a read range of up to 4 inches and is powered by a USB interface.
This UHF RFID reader kit is compliant to ISO 18000-6B, EPC Class 1, EPC Class 1 GEN 2 Protocols. The kit has multiple interfaces and a multi-reader synchronization function.
This UHF 902-928 MHz 9dBic RHCP RFID Antenna circular polarization is designed for side or overhead mounting and delivers highly reliable read rates.
This compact active OEM reader can be configured or tuned through ERM software and has an adjustable range of up to 262 ft (80 m).
This Active People Tracking RFID system kit consists of a range of 2.45 GHz tags, readers and antennas that can be setup for evaluating the GAO RFID Active Long-Range Personnel Tracking System.
This active hub reader is fully dedicated for Telematics applications and provides easy, flexible, and wireless solutions for automatic identification/event detection/sensor monitoring.
This active reader is IP65 rated for wet locations, reads up to 330 ft (100 m) with multiple connectivity interfaces, and can work as a standalone device.
This wall-mounted active reader is IP54 rated, detects tags or cards up to 7.9‘‘ (20 cm) away, and has a double tone buzzer.
This wall-mounted active reader is IP54 rated, detects tags or cards up to 7.9‘‘ (20 cm) away, and has a double tone buzzer.
This active USB hands-free reader is made of ABS material with an integrated antenna, an adjustable range of up to 7.9" (20 cm), and includes tool configuration software.
This bi-directional reader detects and counts RFID tags as they pass by from multiple directions and has an adjustable range of up to 262 ft (80 m).
GAORFID SKU# 226005 is a handheld and sled designed, Bluetooth 4.0 Plug & Play Scanner with 860~960MHz UHF gen 2 RFID and 1D/2D barcode features all together.
GAORFID SKU# 226004 is a handheld Bluetooth 4.0 Plug & Play Scanner with superior RFID performance.
GAORFID SKU#246040 scanner is a newly-developed desktop or wall mounted UHF reader and writer.
Bluetooth 4.0 Plug & Play 13.56MHz reader with superior RFID performance. It offers flexible options for data transfer to a host through Bluetooth 4.0.
This handheld UHF Gen 2 RFID Reader offers flexible options for data transfer to a host through Bluetooth. It allows for easy connection to devices such as PDAs, laptops or smart phones.