UHF 433MHz 9 dBi RFID Antenna

With a compact design and robust construction, this circular 433 MHz RFID antenna is resistant to typical environmental influences.

304022

Description

Overview

Download Our PDF Product Document
Download Our PDF Product Document

With a compact design and robust construction, this circular RFID antenna is resistant to typical environmental influences; the antenna is perfectly suited for applications in agriculture and industrial automation. It is also specially designed to be used in double sided arrangements with a single reader for applications that require large reading volumes. The antenna has a very wide beam width to maximize zone coverage.

Technical Specifications

Model number 304022
Electrical
Frequency Range 430 to 437 MHz
Gain 9 dBi (min)
VSWR 1.4:1 (max) 1.2:1 (typ.)
Azimuth 3 dB Beam width 68° (typ.)
Elevation 3 dB Beam width 70° (typ.)
Polarization LHCP
Side lobes Level at ±90° and Front to Back -10.5 dB (max)
Axial Ratio at boresight 432 to 434 MHz at 2 dB (max)
430 to 432 MHz at 4 dB (max)
434 to 437 MHz at 4 dB (max)
Input Impedance 50 (ohm)
Input Power 6 W (max)
Lightning Protection DC Grounded
Mechanical
Dimensions (L x W x D) 371 x 371 x 40 mm
Weight 2.0 kg (max)
Connector N – type
Radome Plastic
Base Plate Aluminum with chemical conversion coating
Outline drawing See below
Mounting kit MT-120018
Environmental
Test Standard Duration Temperature Notes
Temperature IEC 68-2-1/2 72 h -55 °C to 71 °C
Temp. Cycling IEC 68-2-14 1 h -45 °C to 70 °C 3 Cycles
Thermal shock non-oper. -30 °C to 70 °C Ramp 30 °C/min
Humidity ETSI EN300-2-4 T4.1E 144 h 95%
Water tightness IEC 529 IP67
Dust resistance
Solar radiation ASTM G53 1000 h
Ozone resistance ETSI 300
Flammability UL 4 Class HB
Quasi random vibration 20 g rms for 4 hours
Vehicle vibration 1g rms, 10-500 Hz, in 3 axis 6 hours total, 2 h in each axis. Accelerated wear – an additional 50 h in worst case axis
Operating
Mechanical shock 10g, 11 msec,
Operating half sine pulse